Free Roof InspectionBook OnlineCracked, loose or rotted boards can be replaced without wrapping the whole Fort Worth house, as long as the rest of the wall is sound. Salter Exteriors Roofing & Remodeling repairs fiber cement, vinyl and wood siding, checks the wrap and flashing behind the damage, and paints new boards to blend. For whole-wall work, see siding replacement in Fort Worth.
Call or text 972-246-7448 for a free estimate for your property.
On 1910s–1930s homes in Fairmount, Ryan Place, Mistletoe Heights and Arlington Heights, damage often starts at wood trim, bottom courses and corners, where water sits. Mid-century houses in Ridglea, Westcliff, Wedgwood and Tanglewood often need gable or addition boards replaced where trees have held moisture against the wall. In newer north Fort Worth around Alliance and Heritage, hail more often leaves a scatter of cracked or bruised boards on the windward side, which can be repaired when the rest of the siding is still sound.
James Hardie recommends a 100% acrylic exterior topcoat on fiber-cement boards and says not to use stain or oil-based paint. Vinyl should not be painted darker than the original color in Texas sun, or it can warp; Sherwin-Williams VinylSafe colors are made to stay closer to the original heat load on sound vinyl. Already-warped panels need to be replaced, not painted.
If damage is limited to a few boards and the rest of the wall is sound, repair it. If hail marks, rot or warping run across whole walls, siding replacement in Fort Worth usually makes more sense. We will show you the photos and give you both options in a detailed estimate for your property.
Salter Exteriors Roofing & Remodeling has served North Texas since 2014, has helped with more than 2,500 insurance claims, holds a BBB A+ rating and has a 4.9-star rating from 56 Google reviews. Estimates are free, and labor on completed work is covered by a 5-year labor warranty that transfers if you sell within those 5 years.
Yes. When the rest of the wall is sound, we replace only the cracked, dented or rotted boards, check the wrap and flashing behind them, and paint the new boards to blend.
We look for the closest available profile and tell you up front how close a match is possible before any work starts. On older homes, some original profiles may be discontinued.
James Hardie recommends a 100% acrylic exterior topcoat and says not to use stain or oil-based paint. Factory-primed boards should be painted within 180 days of installation, and boards should never be painted wet.
Paint that is darker than the original vinyl can absorb heat and warp the panels. We stay at or lighter than the original color, or use a Sherwin-Williams VinylSafe color made to resist warping on sound vinyl.
Damage from a covered storm often is, minus your deductible. Wear and rot usually are not. We document storm damage with dated photos if you decide to file.
It depends on how many boards, the siding type and whether paint is needed. You get a detailed estimate for your property with the project total before work begins. Call or text 972-246-7448.
For a free estimate for your property, call or text Aaron at 972-246-7448. Salter Exteriors Roofing & Remodeling has handled exterior repairs since 2014 and is based in Fort Worth, TX.